> For the complete documentation index, see [llms.txt](https://kb.logicerp.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://kb.logicerp.com/logic-erp-learning-hub-tutorials-and-best-practices/inventory/warehouse-management-features-and-configuration-in-logic-erp/wms-mobile-app/getting-started-with-the-wms-app.md).

# Getting Started with the WMS App

## Getting Started with the WMS App

In this tutorial, we will learn how to **log in** to the Logic ERP WMS app, set up the **scanner**, and understand how the app **saves and uploads** your work.

***

### Before You Start

Each warehouse user needs a login created in Logic ERP:

* Navigate to the **User Access** module.
* Open **Setup Mobile WMS Users**.
* Enter the **User Name**, **User Password** and **Mobile No** of the user, and optionally the **Email ID**.
* Save.

The user is created for the branch you are logged into. The **Mobile No** is the **User ID** the user types in the app. Mobile No and password are both required.

The app also needs the address of your Logic ERP server. Ask your Logic ERP support team for these details the first time the app is installed.

***

### Set the Server Address

This is needed only once on each phone.

* Open the app.
* **Double-tap the Logic logo** on the login screen.
* Enter the **API Address**, **Username** and **Password** given by your support team.
* Tap **Save**, then **Yes**.

The app shows *"Api Settings Updated!"*.

***

### Log In

* Enter your **User ID** (your mobile number).
* Enter your **Password**.
* Tap **Login**.

The Home screen opens with the options allowed for you. You stay logged in until you log out.

**Messages you may see**

| Message                                            | Meaning                                                      |
| -------------------------------------------------- | ------------------------------------------------------------ |
| *Invalid or wrong credentials! Please try again..* | The User ID or password is wrong                             |
| *User ID … Marked As In-Active...*                 | The user has been marked In-Active in Setup Mobile WMS Users |
| *Branch Not Linked againts User ID …*              | The user is not linked to a branch                           |

***

### The Home Screen

The icons at the top of the Home screen:

* **Refresh** – downloads the latest options, settings and staging areas from Logic ERP.
* **Settings** – changes how the app scans.
* **Exit** – logs you out. The app asks *"Are you sure you want to log-out?"*; tap **Yes**. You need an internet connection to log out.

***

### Settings

| Setting                   | What it does                                                                                                         |
| ------------------------- | -------------------------------------------------------------------------------------------------------------------- |
| **Dark mode**             | Shows the app in dark colours                                                                                        |
| **Tap-To-Scan**           | Tapping an item counts as one scan of that item                                                                      |
| **Play Sound On Scan**    | Plays a sound on every scan                                                                                          |
| **Handheld Scanner**      | Use this on a handheld scanner device. The camera is not used; the scanned barcode is read into the scan box instead |
| **Keep Screen On**        | Stops the screen from switching off while you work                                                                   |
| **Barcode Scan Interval** | The gap in milliseconds between two camera scans (default 1000)                                                      |

* **API Settings** shows the server address the app is using.
* **App Info** shows the app version, the user logged in and the device ID.

***

### Scanning with the Phone Camera

When **Handheld Scanner** is off, the scan pages show the camera, with three icons:

* **Flashlight** – turns the phone light on or off.
* **Switch Camera** – changes between the front and back camera.
* **Stop** – pauses the camera. Tap it again to start.

The app asks for permission to use the camera the first time.

***

### How Your Work Is Saved

* Every scan is saved on the phone as you work. If the app is closed, your work is still there when you open it again.
* Nothing reaches Logic ERP until you **upload** the task.
* In **Pick Only**, **Pick & Pack** and **Put Away**, you simply continue where you left off.
* In the other options, the app asks *"Data found against … Tap 'Yes' to recover data, else 'No' to start again."* Tap **Yes** to continue. **No** discards the saved work.
* The app needs an internet connection to download and upload tasks. Without one it shows *"No internet connection! Please check your network status."*

***

#### Final Outcome

Once the server address is set and the user has logged in, the warehouse user can start work from the Home screen. Every scan is kept safely on the phone until the task is uploaded to Logic ERP.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://kb.logicerp.com/logic-erp-learning-hub-tutorials-and-best-practices/inventory/warehouse-management-features-and-configuration-in-logic-erp/wms-mobile-app/getting-started-with-the-wms-app.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
