> For the complete documentation index, see [llms.txt](https://kb.logicerp.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://kb.logicerp.com/logic-erp-learning-hub-tutorials-and-best-practices/inventory/warehouse-management-features-and-configuration-in-logic-erp/wms-mobile-app/de-allocate-stock.md).

# De-Allocate Stock

## WMS App – De-Allocate Stock

In this tutorial, we will learn how a warehouse operator uses the **DE-ALLOCATE STOCK** option of the WMS app to take stock **out of a bin** by scanning.

The operator scans the **bin**, then scans the items or sets that are being taken out of it. When the work is uploaded, Logic ERP issues that stock out of the bin. The stock stays in the branch's stock; it is simply **no longer held in any bin**. It can later be placed in a bin again with **Allocate Stock to Bin**.

***

### Open the Bin

* Open the WMS app and tap **DE-ALLOCATE STOCK**.
* Scan the **bin barcode**, or type it under **Bin Barcode :** and tap **Fetch Data**.
* The bin is shown. Tap it.
* The items held in the bin are listed. By default each item shows its **Quantity** (the stock in the bin), **Qty Scanned**, **Pending** and **Booked** quantities.

If you had started work on this bin earlier and not uploaded it, the app asks *"Data found against Bin Barcode : '…'. Tap 'Yes' to recover data, else 'No' to start again."* Tap **Yes** to continue where you left off, or **No** to start again.

**Messages you may see**

| Message                             | Meaning                                                         |
| ----------------------------------- | --------------------------------------------------------------- |
| *No Bin found againts Bin Name : …* | The scanned bin barcode does not belong to any bin in Logic ERP |

***

### Scan the Items to Take Out

* Take an item out of the bin and scan its barcode.
* Each scan takes one unit out. The **Qty Scanned** of the item goes up and its **Pending** goes down.
* The last scanned item moves to the top of the list; items whose full quantity has been scanned move to the end of the list. The totals are shown at the bottom of the screen.

How a scan is read depends on the **Bin Type** of the bin, set in **Setup\Setup Items\Setup Bins**:

* **Item (Loose)** – scan the item barcode.
* **Set (Box)** – scan the **set** barcode. Every item of the set is taken out at once, in the quantity the set contains. All items of the set must be in the bin in enough quantity.
* **None** – scan an item barcode or a set barcode. If the barcode is not an item of the bin, the app reads it as a set.

If **Tap-To-Scan** is on in your settings, tapping an item counts as one scan of that item.

**Messages you may see**

| Message                                                     | Meaning                                                            |
| ----------------------------------------------------------- | ------------------------------------------------------------------ |
| *No record found with barcode : …*                          | The scanned item is not in this bin                                |
| *Pending quantity not available...*                         | The full quantity of this item in the bin has already been scanned |
| *Available qty is less than required qty for item : …. (…)* | The bin does not have enough of one of the set's items             |
| *Unable to found Set Code..…*                               | The barcode is neither an item of the bin nor a set                |

***

### Edit the Quantity

* **Swipe the item to the left** and tap the **edit** icon.
* A window opens with the heading **bin | item name | size**. It lists a row for each godown that holds the item in this bin, with its **Godown Name**, **Bin Name** and **Scanned Qty**.
* Tap a row. The **EDIT | … | …** window opens, showing the godown and bin.
* Type the quantity in **Enter Qty**. It cannot be more than the **Max Qty** shown; tap **Max Qty** to use the full quantity.
* Tap **Proceed**.
* To clear a row, **swipe the row to the right** and tap the **X** icon.
* Tap **Done** to keep the changes, or **Cancel** to discard them.

**Messages you may see**

| Message                                                  | Meaning                                                                 |
| -------------------------------------------------------- | ----------------------------------------------------------------------- |
| *Item quantity changes are not allowed for current BIN.* | The bin is a Set (Box) bin. Quantities of a set bin can only be scanned |
| *Quantity cannot be greater than …*                      | The quantity entered is more than the Max Qty                           |

***

### Other Item Options

* **Swipe the item to the right** and tap the **copy** icon to copy the item code.

***

### Upload

* Tap **Upload**.
* The app asks *"Are you sure to submit record?"*. Tap **Yes**.

The app shows *"Data submitted successfully..."* and goes back to the bin scan screen.

**Result:** Logic ERP saves a de-allocation document. The scanned quantities are issued out of the bin. They are not added to any other bin, and the stock of the item in the branch does not change.

**Messages you may see**

| Message                                                              | Meaning                                         |
| -------------------------------------------------------------------- | ----------------------------------------------- |
| *Nothing to upload...*                                               | No item has been scanned                        |
| *Stock(Lot Mst) For Item … Lot Code … Will Go in -(ive) Cannot Save* | The bin no longer has enough stock of this item |

***

> **Example — Emptying a damaged bin**
>
> Bin **C-04-02** is damaged and its 8 cartons of socks must be taken out. Anita taps **DE-ALLOCATE STOCK**, scans bin C-04-02 and taps it. She carries the cartons out one by one and scans each of them, until **Qty Scanned** shows 8. She taps **Upload** and **Yes**. Bin C-04-02 now shows no stock, and the 8 cartons are still in the branch's stock, ready to be allocated to a new bin.

***

### Track the De-Allocations

The de-allocations made from the app can be seen in Logic ERP in **Reports/Queries\Stock Reports\Document Wise Bin Allocation/De-Allocation Report**, with **Report Type** set to **Stock Issued From Bin**.

***

#### Final Outcome

Using **De-Allocate Stock**, the warehouse operator takes stock out of a bin by scanning, and Logic ERP stops showing that stock in the bin while keeping it in the branch's stock.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://kb.logicerp.com/logic-erp-learning-hub-tutorials-and-best-practices/inventory/warehouse-management-features-and-configuration-in-logic-erp/wms-mobile-app/de-allocate-stock.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
