> For the complete documentation index, see [llms.txt](https://kb.logicerp.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://kb.logicerp.com/logic-erp-learning-hub-tutorials-and-best-practices/inventory/warehouse-management-features-and-configuration-in-logic-erp/wms-mobile-app/cycle-count.md).

# Cycle Count

## WMS App – Cycle Count

In this tutorial, we will learn how a warehouse operator uses the **CYCLE COUNT** option of the WMS app to count the stock of a **bin** and correct the bin stock in Logic ERP.

The app shows the stock that Logic ERP holds in the bin. The operator scans what is physically there. When the count is uploaded, Logic ERP **takes any shortfall out of the bin** and keeps an **audit record** of the count, which can be seen in the **Audit Bin Stock Report**.

***

### Before You Start

* Each bin has a **Bin Type**, set in **Setup\Setup Items\Setup Bins**: **None**, **Item (Loose)** or **Set (Box)**. The bin type decides what you scan in the bin (see **Count the Stock**).
* In **User Access\Setup Mobile WMS Users**, the option **Allow Excess Scanning in Cycle Count** can be switched on for a user. See **Extra Stock in the Bin**.
* A bin that holds stock reserved for a Sale Order cannot be cycle counted.

***

### Scan the Bin

* Open the WMS app and tap **CYCLE COUNT**.
* Scan the bin barcode into the **Bin Barcode** box (tap the scanner icon in the box to scan with the camera), or type it and tap **Fetch Data**.
* The bin is shown. Tap it.
* If you had already started counting this bin, the app asks *"Data found against Bin Barcode : '…'. Tap 'Yes' to recover data, else 'No' to start again."* Tap **Yes** to continue your count, or **No** to start again.
* The items that Logic ERP holds in the bin are listed.

**Messages you may see**

| Message                                                              | Meaning                                                                           |
| -------------------------------------------------------------------- | --------------------------------------------------------------------------------- |
| *No Bin found againts Bin Name : …*                                  | No bin has this barcode                                                           |
| *Item has been blocked againts Select Bin. Cycle Count not allowed.* | Some stock in this bin is reserved for a Sale Order, so the bin cannot be counted |

***

### Count the Stock

Scan the stock in the bin. Each scan adds one to the scanned quantity, and the item moves to the top of the list. Once all of an item's stock has been counted, it moves below the items that are still to be counted. What you scan depends on the bin type:

| Bin Type         | What you scan                                                                                                                |
| ---------------- | ---------------------------------------------------------------------------------------------------------------------------- |
| **Item (Loose)** | The barcode of each item unit                                                                                                |
| **Set (Box)**    | The **set barcode**. The app counts every item of the set in one scan                                                        |
| **None**         | The item barcode of a loose unit, or the set barcode of a set. A barcode that is not one of the bin's items is read as a set |

If an item is in the bin in more than one lot, the scans fill the lots one after the other.

**Messages you may see**

| Message                                                        | Meaning                                                                              |
| -------------------------------------------------------------- | ------------------------------------------------------------------------------------ |
| *No record found with barcode : …*                             | The item is not in this bin's list, or an item of the scanned set is not in this bin |
| *Pending quantity not available...*                            | All the stock of this item in the bin has already been counted                       |
| *Available pending qty is less than required qty for item : …* | The set holds more of an item than is still pending in the bin                       |
| *Bin cannot be (NIL).. Please scan another bin to continue...* | The (NIL) bin cannot be counted. Go back and scan a real bin                         |

***

### Scan All

If the bin matches the stock shown, you do not need to scan every unit:

* Tap **Scan All**.
* Tap **Yes** on *"Are you sure to update scanned quantity of all records?"*.

Every item is marked as fully counted and the app shows *"Done! Data updated successfully..."*. You can then correct any item with **Edit**.

***

### Item Options

* **Edit** – swipe the item to the **left** and tap the **edit** icon. A list opens with one line for each lot of the item, showing its **Godown Name**, **Bin Name** and **Scanned Qty**. Tap a line, type the quantity counted in **Enter Qty** and tap **Proceed**. **Max Qty** shows the stock of that lot in the bin; tap it to copy it into Enter Qty. Tap **Done** to keep the changes, or **Cancel** to leave without them.
* **Clear a lot** – in the Edit list, swipe a line to the **right** and tap the **X** icon. Its scanned quantity is removed.
* **Copy** – swipe the item to the **right** and tap the **copy** icon to copy the item code.
* **Image** – tap the picture icon on the item to see its images.

If **Tap-To-Scan** is on, tapping an item counts as one scan of it.

**Messages you may see**

| Message                             | Meaning                                                      |
| ----------------------------------- | ------------------------------------------------------------ |
| *Quantity cannot be greater than …* | The quantity entered is more than the lot's stock in the bin |

***

### Extra Stock in the Bin

When **Allow Excess Scanning in Cycle Count** is on for you:

* In an **Item (Loose)** or **None** bin, you can scan an item that Logic ERP does not hold in the bin. The app fetches the item from Logic ERP and adds it to the list.
* Once all the stock of an item has been counted, further scans of it are recorded on a separate **(EXTRA)** line, shown in **Edit**.
* In **Edit**, you can enter more than **Max Qty**.

Extra quantity is **not added** to the bin stock. It is recorded in the audit of the count and shown as **UN-ADJUSTED QTY** in the **Audit Bin Stock Report**.

***

### Upload the Count

* Tap **Upload**.
* Tap **Yes** on *"Are you sure to submit record?"*.

The app shows *"Data submitted successfully..."* and returns to the bin scan.

**Result:** In Logic ERP:

* For each item lot, any quantity that was **not scanned** is taken out of the bin. A lot with no scans at all is taken out of the bin completely.
* Extra quantity found is not added to the bin.
* A record of the count is saved for the **Audit Bin Stock Report**.

**Messages you may see**

| Message                                                              | Meaning                                                                                                |
| -------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------ |
| *Nothing to upload...*                                               | Nothing has been scanned in this bin yet                                                               |
| *Item has been blocked againts Select Bin. Cycle Count not allowed.* | Stock in the bin has been reserved for a Sale Order since you started. Nothing is changed in Logic ERP |

***

> **Example — Counting a loose bin**
>
> Bin **A-01-02** is an **Item (Loose)** bin. Logic ERP shows 10 shirts and 4 jeans in it. Ravi taps **CYCLE COUNT**, scans bin A-01-02 and taps it. He scans the 4 jeans, then finds only 9 shirts and scans them. He taps **Upload** and **Yes**. Logic ERP takes 1 shirt out of bin A-01-02, and the **Audit Bin Stock Report** shows the shirts with **QUANTITY** 10 and **AUDIT QTY** 9.

***

### Check the Counts in Logic ERP

Open **Reports/Queries\Stock Reports\Audit Bin Stock Report** and choose the date range. For each counted bin and item, the report shows the **QUANTITY** in the bin, the **AUDIT QTY** counted and the **UN-ADJUSTED QTY** (extra quantity found). Its options can also show the WMS user and the date and time of the count.

The **UN-ADJUSTED QTY** shows the extra quantity from the latest count of each bin. When a bin is counted again, its earlier extra quantities are cleared.

***

#### Final Outcome

Using **Cycle Count**, the warehouse operator counts a bin by scanning, and Logic ERP corrects the bin stock for any shortfall and keeps a record of every count for review.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://kb.logicerp.com/logic-erp-learning-hub-tutorials-and-best-practices/inventory/warehouse-management-features-and-configuration-in-logic-erp/wms-mobile-app/cycle-count.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
