> For the complete documentation index, see [llms.txt](https://kb.logicerp.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://kb.logicerp.com/logic-erp-learning-hub-tutorials-and-best-practices/inventory/warehouse-management-features-and-configuration-in-logic-erp/wms-mobile-app/bin-to-bin-transfer.md).

# Bin to Bin Transfer

## WMS App – Bin to Bin Transfer

In this tutorial, we will learn how a warehouse operator uses the **BIN TO BIN TRANSFER** option of the WMS app to move stock from one bin to another by scanning.

The operator scans the **source bin** (the bin the stock is taken from), chooses a **target bin** with **Change Bin**, and scans the items being moved. The stock of one source bin can be split across several target bins. When the transfer is uploaded, Logic ERP moves the stock out of the source bin and into the target bins.

***

### Open the Source Bin

* Open the WMS app and tap **BIN TO BIN TRANSFER**.
* Scan the **bin barcode** of the source bin, or type it under **Bin Barcode :** and tap **Fetch Data**.
* The bin is shown. Tap it.
* The items held in the bin are listed. By default each item shows its **Quantity** (the stock in the bin), **Qty Scanned**, **Pending** and **Booked** quantities.

If you had started a transfer for this bin earlier and not uploaded it, the app asks *"Data found against Bin Barcode : '…'. Tap 'Yes' to recover data, else 'No' to start again."* Tap **Yes** to continue where you left off, or **No** to start again.

**Messages you may see**

| Message                             | Meaning                                                         |
| ----------------------------------- | --------------------------------------------------------------- |
| *No Bin found againts Bin Name : …* | The scanned bin barcode does not belong to any bin in Logic ERP |

***

### Choose the Target Bin

* Tap **Change Bin**. The button is highlighted and the app shows *"Scan Bin barcode now!!!"*.
* Scan the barcode of the **target bin**.
* The app shows *"Bin changed successfully to '…' ."*.
* The line above the item list shows **source bin | target bin**. Until a target bin is chosen it shows **(NIL)**.

Tap **Change Bin** again before scanning a bin if you want to cancel the change.

The target bin must be of the same **Bin Type** as the source bin, or have the Bin Type **None**. The Bin Type of a bin (**None**, **Item (Loose)** or **Set (Box)**) is set in **Setup\Setup Items\Setup Bins**.

**Messages you may see**

| Message                                                                                    | Meaning                                                                |
| ------------------------------------------------------------------------------------------ | ---------------------------------------------------------------------- |
| *No Bin found againts Bin Name : …*                                                        | The scanned target bin barcode does not belong to any bin in Logic ERP |
| *Bin Type does not match with the Source Bin (…). Only SET allowed in this bin.*           | The target bin is a Set (Box) bin, but the source bin is not           |
| *Bin Type does not match with the Source Bin (…). Only LOOSE item(s) allowed in this bin.* | The target bin is an Item (Loose) bin, but the source bin is not       |
| *Bin cannot be (NIL).. Please scan another bin to continue...*                             | You scanned an item before choosing a target bin                       |

***

### Scan the Items

* Take an item out of the source bin and scan its barcode.
* Each scan moves one unit to the current target bin. The **Qty Scanned** of the item goes up and its **Pending** goes down.
* The last scanned item moves to the top of the list; items whose full quantity has been scanned move to the end of the list. The totals are shown at the bottom of the screen.

How a scan is read depends on the **Bin Type of the target bin**:

* **Item (Loose)** – scan the item barcode.
* **Set (Box)** – scan the **set** barcode. Every item of the set is moved at once, in the quantity the set contains. All items of the set must be in the source bin with enough pending quantity.
* **None** – scan an item barcode or a set barcode. If the barcode is not an item of the source bin, the app reads it as a set.

If **Tap-To-Scan** is on in your settings, tapping an item counts as one scan of that item.

**Messages you may see**

| Message                                                             | Meaning                                                                   |
| ------------------------------------------------------------------- | ------------------------------------------------------------------------- |
| *No record found with barcode : …*                                  | The scanned item is not in the source bin                                 |
| *Pending quantity not available...*                                 | The full quantity of this item in the source bin has already been scanned |
| *Available pending qty is less than required qty for item : …. (…)* | The source bin does not have enough of one of the set's items             |
| *Unable to found Set Code..…*                                       | The barcode is neither an item of the source bin nor a set                |

***

### Split the Stock Across Several Bins

You can move the stock of one source bin into more than one target bin in the same transfer:

* Scan the items for the first target bin.
* Tap **Change Bin** and scan the next target bin.
* Scan the items for that bin.
* Repeat for as many target bins as you need.

Each scan goes to the target bin shown at the top of the screen at that moment.

***

### Edit the Quantity

* **Swipe the item to the left** and tap the **edit** icon.
* A window opens with the heading **target bin | item name | size**. It lists a row for each godown and target bin the item is being moved to, with its **Godown Name**, **Bin Name** and **Scanned Qty**. Rows are added for the current target bin. Type in the **search** box to find a row by bin name.
* Tap a row. The **EDIT | … | …** window opens, showing the godown and bin.
* Type the quantity in **Enter Qty**. It cannot be more than the **Max Qty** shown; tap **Max Qty** to use the full quantity.
* Tap **Proceed**.
* To remove a bin row, **swipe the row to the right** and tap the **X** icon.
* Tap **Done** to keep the changes, or **Cancel** to discard them.

Choose the target bin with **Change Bin** before you use **Edit**.

**Messages you may see**

| Message                                                  | Meaning                                                                        |
| -------------------------------------------------------- | ------------------------------------------------------------------------------ |
| *Item quantity changes are not allowed for current BIN.* | The target bin is a Set (Box) bin. Quantities of a set bin can only be scanned |
| *Quantity cannot be greater than …*                      | The quantity entered is more than the Max Qty                                  |

***

### Scan All

To move everything left in the source bin to the current target bin in one step (for target bins with the Bin Type **Item (Loose)** or **None**):

* Choose the target bin with **Change Bin**.
* Tap **Scan All**.
* The app asks *"Are you sure to update scanned quantity of all records?"*. Tap **Yes**.
* The app shows *"Done! Data updated successfully..."*.

***

### Other Item Options

* **Swipe the item to the right** and tap the **copy** icon to copy the item code.

***

### Upload the Transfer

* Tap **Upload**.
* The app asks *"Are you sure to submit record?"*. Tap **Yes**.

The app shows *"Data submitted successfully..."* and goes back to the bin scan screen.

**Result:** Logic ERP saves a bin-to-bin transfer document. The scanned quantities are taken out of the source bin and added to each target bin. The stock of the item in the branch does not change; only the bin that holds it changes.

**Messages you may see**

| Message                                                              | Meaning                                                |
| -------------------------------------------------------------------- | ------------------------------------------------------ |
| *Nothing to upload...*                                               | No item has been scanned                               |
| *Stock(Lot Mst) For Item … Lot Code … Will Go in -(ive) Cannot Save* | The source bin no longer has enough stock of this item |

***

> **Example — Splitting a bin across two bins**
>
> Bin **A-01-03** holds 10 shirts. Rahul wants to put 6 of them into bin **A-02-01** and 4 into bin **A-02-02**. He taps **BIN TO BIN TRANSFER**, scans bin A-01-03 and taps it. He taps **Change Bin** and scans A-02-01, then scans 6 shirts. He taps **Change Bin** again, scans A-02-02 and scans the last 4 shirts. He taps **Upload** and **Yes**. Bin A-01-03 is now empty, A-02-01 holds 6 shirts and A-02-02 holds 4.

***

### Track the Transfers

The transfers made from the app can be seen in Logic ERP in **Reports/Queries\Stock Reports\Document Wise Bin Allocation/De-Allocation Report**, with **Report Type** set to **Bin To Bin Transfer**.

***

#### Final Outcome

Using **Bin to Bin Transfer**, the warehouse operator moves stock between bins by scanning, can split one bin across several bins, and Logic ERP keeps the bin-wise stock exactly in line with where the goods now are.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://kb.logicerp.com/logic-erp-learning-hub-tutorials-and-best-practices/inventory/warehouse-management-features-and-configuration-in-logic-erp/wms-mobile-app/bin-to-bin-transfer.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
