> For the complete documentation index, see [llms.txt](https://kb.logicerp.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://kb.logicerp.com/logic-erp-learning-hub-tutorials-and-best-practices/inventory/warehouse-management-features-and-configuration-in-logic-erp/wms-mobile-app/allocate-stock-to-bin.md).

# Allocate Stock to Bin

## WMS App – Allocate Stock to Bin

In this tutorial, we will learn how a warehouse operator uses the **ALLOCATE STOCK TO BIN** option of the WMS app to place stock **into a bin** by scanning.

This is used for stock that is in the branch but is not yet held in a bin, for example stock taken out of a bin with **De-Allocate Stock**. The operator scans the **bin**, then scans each item or set placed in it. When the work is uploaded, Logic ERP adds that stock to the bin.

***

### Open the Bin

* Open the WMS app and tap **ALLOCATE STOCK TO BIN**.
* Scan the **bin barcode**, or type it under **Bin Barcode :** and tap **Fetch Data**.
* The bin is shown. Tap it.
* The scan screen opens with the bin barcode as its title. The list is empty until you scan.

If you had started work on this bin earlier and not uploaded it, the app asks *"Data found against Bin Barcode : '…'. Tap 'Yes' to recover data, else 'No' to start again."* Tap **Yes** to continue where you left off, or **No** to start again.

**Messages you may see**

| Message                             | Meaning                                                         |
| ----------------------------------- | --------------------------------------------------------------- |
| *No Bin found againts Bin Name : …* | The scanned bin barcode does not belong to any bin in Logic ERP |

***

### Scan the Stock into the Bin

* Place an item in the bin and scan its barcode.
* The app checks the item's stock in your branch. Each scan adds one unit to the bin.
* The scanned item appears at the top of the list. By default it shows its **Quantity** (the item's stock in the branch), **Qty Scanned** and **Pending**. The totals are shown at the bottom of the screen.
* You cannot allocate more than the item's stock in the branch.

What you scan depends on the **Bin Type** of the bin, set in **Setup\Setup Items\Setup Bins**:

* **Item (Loose)** or **None** – scan the item barcode.
* **Set (Box)** – scan the **set** barcode. Every item of the set is added at once, in the quantity the set contains. If one item of the set does not have enough stock, nothing of that set is added.

If **Tap-To-Scan** is on in your settings, tapping an item in the list counts as one more scan of that item.

**Messages you may see**

| Message                                  | Meaning                                                                                       |
| ---------------------------------------- | --------------------------------------------------------------------------------------------- |
| *Pending quantity not avaialble... \| …* | The whole stock of this item in the branch has already been scanned, or the item has no stock |

***

### Remove a Wrong Scan

If you scanned an item by mistake:

* Tap the **+** button next to **Upload**. It turns into **−** and is highlighted, and the app shows *"Scan barcode to be removed!!!"*.
* Scan the item to take one scan off. In a **Set (Box)** bin, scan the set barcode to take the whole set off.
* Tap the **−** button again to go back to adding stock.

Only items already in the list can be removed.

**Messages you may see**

| Message                          | Meaning                                                                   |
| -------------------------------- | ------------------------------------------------------------------------- |
| *Quantity not avaialble... \| …* | Nothing has been scanned for this item yet, so there is nothing to remove |

***

### Other Item Options

* **Swipe the item to the right** and tap the **copy** icon to copy the item code.

***

### Upload

* Tap **Upload**.
* The app asks *"Are you sure to submit record?"*. Tap **Yes**.

The app shows *"Data submitted successfully..."* and goes back to the bin scan screen.

**Result:** Logic ERP saves an allocation document. The scanned quantities are added to the bin. The stock of the item in the branch does not change; it is now shown as held in that bin.

**Messages you may see**

| Message                | Meaning                  |
| ---------------------- | ------------------------ |
| *Nothing to upload...* | No item has been scanned |

***

> **Example — Placing returned stock in a bin**
>
> 5 pairs of shoes have come back to the warehouse and are not in any bin. Vikram taps **ALLOCATE STOCK TO BIN**, scans bin **D-01-05** and taps it. He places 4 pairs in the bin and scans them, but scans one pair twice, so **Qty Scanned** shows 5. He taps **+** (it turns into **−**), scans that pair once to take the extra scan off, and taps **−** again. He places and scans the last pair, then taps **Upload** and **Yes**. Bin D-01-05 now holds the 5 pairs.

***

### Track the Allocations

The allocations made from the app can be seen in Logic ERP in **Reports/Queries\Stock Reports\Document Wise Bin Allocation/De-Allocation Report**, with **Report Type** set to **Stock Receipt In Bin**.

***

#### Final Outcome

Using **Allocate Stock to Bin**, the warehouse operator places stock into a bin by scanning, within the stock available in the branch, and Logic ERP shows that stock as held in the bin.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://kb.logicerp.com/logic-erp-learning-hub-tutorials-and-best-practices/inventory/warehouse-management-features-and-configuration-in-logic-erp/wms-mobile-app/allocate-stock-to-bin.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
