> For the complete documentation index, see [llms.txt](https://kb.logicerp.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://kb.logicerp.com/logic-erp-learning-hub-tutorials-and-best-practices/inventory/warehouse-management-features-and-configuration-in-logic-erp/physical-stock-verification-and-bin-transfer.md).

# Physical Stock Verification & Bin Transfer

**YouTube:** [WMS – Physical Stock Verification & Bin Transfer](https://youtu.be/CHEQ5yZ_odo)

## WMS Physical Stock Verification & Bin Transfer

In this tutorial, we will learn how to Physically verify the Goods Received from a supplier and allocate them to a suitable warehouse bin using **Physical Stock Verification and Bin Transfer of PUV** (Purchase Voucher) in Logic ERP.

We will also learn how to configure Space Management for automatic bin allocation and use the **Document Wise Bin Allocation/De-Allocation Report** to track the movement and storage location of inventory.

***

### Open Physical Stock Verification and Bin Transfer

* Navigate to the **Inventory** module from the main menu.
* Open the **Physical Stock Verification and Bin Transfer of PUV** window.

Physical stock verification can be performed in different ways. In this tutorial, we will focus on the first method: **Automatic Bin Allocation Using Space Management**.

Saving this screen needs the WMS Space Management module. Without it, the message *"WMS Space Management Module is not active.."* is shown.

***

### Enable Space Management and Automatic Bin Assignment

Before starting the physical stock verification process, click **Configuration** to open the **Barcode Configuration** window.

Make sure the following options are enabled:

* **Use Space Management**
* **Allow Auto Assign Bin** (available only when Use Space Management is ticked)

<figure><img src="https://4031188996-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXMVkjt8zqHBQX1c9QvFS%2Fuploads%2FYPNwLZd76nYQ0RHXEkHX%2FCNF.png?alt=media&#x26;token=455a8731-60c9-4f8a-85f8-b9f13b89f9a3" alt=""><figcaption></figcaption></figure>

Save the configuration changes.

#### Objective

When these options are enabled, the system can automatically suggest and assign a suitable warehouse bin based on the available storage space.

To use this functionality, we must first define the storage types, and the capacity and dimensions of the bins, in **Setup Bins**.

***

### Define Bin Storage Details

* Navigate to the **Setup** module.
* Open **Setup Items**.
* Click on **Setup Bins**.

The **Define Bin Storage**, **Define Rack** and **Define Bins** tabs are shown only when **Use Warehouse Management System** is ticked in the **Configuration** of Setup Bins.

<figure><img src="https://4031188996-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXMVkjt8zqHBQX1c9QvFS%2Fuploads%2FwdATQNRAaf1DMDY09f72%2FSETUP%20BINS.png?alt=media&#x26;token=b2fbaf39-cde1-43d6-8be3-41698e22324c" alt=""><figcaption></figcaption></figure>

**Define the Storage Type**

On the **Define Bin Storage** tab, create a storage type:

* Enter the **Storage Name** and **Short Name**.
* Set **Storage Based** to **Quantity Based** or **Volume Based**.
* Link the **Item Group** whose items can be stored in it.

**Configure the Bins**

In the Setup Bins window:

* Click on **Define Bins**.
* Locate the bin you want to configure.
* Open the bin in **Modify** mode to review or update its details.
* Make sure the required storage information is defined.

<figure><img src="https://4031188996-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXMVkjt8zqHBQX1c9QvFS%2Fuploads%2FxlhFLjVdHnhi5CTPEbcj%2F11.png?alt=media&#x26;token=70b0399f-e4ac-4064-b143-af7b9632dba8" alt=""><figcaption></figcaption></figure>

| Field            | Purpose                                                                               |
| ---------------- | ------------------------------------------------------------------------------------- |
| **Storage Type** | The storage type of the bin, which decides the item group that can be allocated to it |
| **Capacity**     | Defines the storage capacity of the bin (in pieces)                                   |
| **Length**       | Specifies the bin's length                                                            |
| **Height**       | Specifies the bin's height                                                            |
| **Width**        | Specifies the bin's width                                                             |

#### Important Point

Defining the bin capacity and dimensions is essential for Space Management. The system uses these details to work out the free space and suggest a suitable bin.

For a **Volume Based** storage type, each item also needs its **Length**, **Breadth** and **Height** in the item's **Pack / Size Details**. Otherwise the message *"Volume is not defined For Item"* is shown.

Once the details are configured, save the changes if any have been made.

***

### Select the Purchase Challan for Verification

Now, return to the **Physical Stock Verification and Bin Transfer of PUV** window.

* Select **Purchase Challan** from the document type list.
* Tick **Purchase Challan**, then search for and select the required Purchase Challan.

<figure><img src="https://4031188996-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXMVkjt8zqHBQX1c9QvFS%2Fuploads%2FFU2sq4l1pLE5Z4dFOdIr%2Fchallan%20filter.png?alt=media&#x26;token=d5c7173a-279c-4920-99e6-601f7d4ff94b" alt=""><figcaption></figcaption></figure>

* Proceed to the **Item Details** section.

The system retrieves the items associated with the selected Purchase Challan.

***

### Verify the Items and Allocate Them to Bins

When the document is retrieved, the system works out the free bins based on the available space and the bin configuration.

* Click **Auto Allocate Stock To Bins** to assign the suitable bins to the items.

Now, physically verify the received goods and proceed with bin allocation.

* Scan the required **Item Codes**. What is scanned (item code, lot code, set code and so on) is set in the configuration.
* Scan or enter the quantities to be allocated to the assigned bin. If you allocate by hand, select or scan the bin first, otherwise the message *"Please Select Bin Before Scanning"* is shown.
* You cannot scan more than the pending quantity or more than the bin capacity.
* Verify that the scanned quantities match the physical stock being allocated.
* Continue until all the required quantities have been scanned and the physical stock verification process is complete.

<figure><img src="https://4031188996-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXMVkjt8zqHBQX1c9QvFS%2Fuploads%2FzrVae84TAZ1rkNKcOr7g%2FITEM%20TRF%20TO%20BIN.png?alt=media&#x26;token=8a9ffb75-0c12-4fbe-a994-7c1983a81c9a" alt=""><figcaption></figcaption></figure>

* Save the Voucher
* Once all the details have been verified, save the voucher.

**Result:** The physical stock verification and bin transfer process is completed, and the verified quantities are allocated to the assigned warehouse bins.

When **Check Rejection/Replacement/Shortage** is ticked in the configuration, the quantities entered in the **Rejection/Replacement Document against Purchase** are left out of the quantity to allocate.

**Put Away with the WMS App**

Instead of allocating bins on this screen, the stock can be put away by warehouse staff with the WMS mobile app. In **Inventory\Put Away Stock**, select the document, allocate the bins (or click **Auto Allocate Bins**), choose the picker in **Select User**, and save. The task then appears in that user's **PUT AWAY** option in the app.

***

### Track Stock Movement Using the Bin Allocation/De-Allocation Report

After transferring the stock to bins, you can use the report to verify where the inventory has been allocated and track subsequent bin movements.

* Navigate to **Reports/Queries**.
* Open **Stock Reports**.
* Select **Document Wise Bin Allocation/De-Allocation Report**.
* Enter the required report criteria and generate the report.

<figure><img src="https://4031188996-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXMVkjt8zqHBQX1c9QvFS%2Fuploads%2FETlb3eDo51XRuF6ppdZk%2FREPORT.png?alt=media&#x26;token=9e10c537-487d-4c4f-96f3-b78d87408df6" alt=""><figcaption></figcaption></figure>

#### Report Details

The report provides document-wise details of bin allocation and deallocation, helping you identify:

* Which document was used for the stock movement.
* Which bin the stock was allocated to.
* From which bin the stock was deallocated.
* How inventory has moved between warehouse bins.

This helps maintain traceability of stock placement and movement within the warehouse.

***

### Final Outcome

By enabling **Use Space Management** and **Allow Auto Assign Bin**, and defining the required bin storage details, Logic ERP can suggest suitable bins based on available storage space.

You can then physically verify the received goods, scan the item codes and quantities, and allocate the stock to the assigned bins. Finally, the **Document Wise Bin Allocation/De-Allocation Report** helps you track where the stock was placed and from which bin it was removed.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://kb.logicerp.com/logic-erp-learning-hub-tutorials-and-best-practices/inventory/warehouse-management-features-and-configuration-in-logic-erp/physical-stock-verification-and-bin-transfer.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
