Get Party Master
Returns your customers and suppliers (parties) from Logic ERP: name, codes, addresses, contact details, GST details, account groups, agent and, if your setup allows it, the current ledger balance. Use it to keep the party list in your system in step with Logic ERP — normally by asking only for parties added or changed since your last call, or to look up a single party by its code.
Endpoint
Address
https://your-server/api/GetPartyMaster
Method
POST
Authorization
Basic Auth
The response and the common request fields are explained in How Every API Call Works.
Request fields
GlobalModifyCode
number
No
0
Your bookmark in the change log, as described in How Every API Call Works. 0 = from the start (or a period, with DateFrom/DateTo), a number = only changes after it, -1 = Logic ERP keeps the bookmark for you.
DateFrom, DateTo
date
No
empty
A period of changes, used when GlobalModifyCode is 0. Send both as null when you are not asking for a period: with GlobalModifyCode 0, leaving them out gives Invalid Date From... Write them as yyyy-MM-dd.
Doc_Codes
text
No
empty
Logic ERP's internal party numbers (ActCode in the response), separated by commas, for example "34,90". Returns exactly these parties; the bookmark and period are ignored. Numbers and commas only.
PartyUserCode
text
No
empty
One party code as shown in Logic ERP (User_Code in the response), for example "C1045". Returns that party whether or not it changed recently; the bookmark and period are ignored.
Branch_Codes_From and Doc_Num_Like are not useful here. Parties do not belong to a branch in the change log, so a period request with Branch_Codes_From filled returns nothing. Doc_Num_Like is matched against Logic ERP's internal party number (ActCode), not the party code. Leave both empty.
Rules Logic ERP applies
Only customers and suppliers are returned. Other accounts (bank, cash, expense and so on) are never returned, even when they appear in the change log.
Your Logic ERP team can limit this endpoint to certain account groups in the API site setup. Parties outside those groups are never returned, whatever you send.
Batches. With a bookmark, each call reads up to 150 change-log lines. A party edited several times in that range is returned once. Because the change log also contains other accounts, a batch can hold fewer parties than lines, or none at all — in that case you get
"Party Not Found..."withStatus: trueand a higherLastGlobalModifyCode. Store it and call again. You have caught up when the message is"Party Master not found against Request...",GetDataisnullandLastGlobalModifyCodeis the value you sent.A party can come back in a later batch. Every save of a party adds a new line to the change log, so a party changed again after your bookmark is returned again in a later batch, with its current details. Update the party in your system; do not insert it a second time.
A period request (
GlobalModifyCode0withDateFromandDateTo) returns every party changed in the period in one call, with no 150-line limit, andLastGlobalModifyCode0.With
PartyUserCodeorDoc_Codes,LastGlobalModifyCodecomes back as0. Do not store it as your bookmark.PartyUserCodemust match the party code exactly. Do not add spaces.Parties are returned in order of
ActCode.Parties that have been deleted in Logic ERP are not returned, so a deletion does not reach you through this endpoint. A party that is still present but flagged as deleted comes back with
Deleted_: true.LedgerBalanceis filled only when your Logic ERP team has switched on "ledger balance" for your API site; otherwise it is0. It is the party's balance in the current financial year, including the opening balance, across all branches. A positive amount means the party owes you (debit); a negative amount means you owe the party (credit).Dates in the response (
Create_Date,Modify_Date) are text written day/month/four-digit year, for example31/01/2026.A link that is not set is shown as
(NIL)(city, state, country, stock-transfer branch, general account group, the party's branch) orNIL(agent). Unused account group levels (Group_Name1…Group_Name8) are empty.
Known issue –
-1together withPartyUserCode. If you send"GlobalModifyCode": -1and aPartyUserCodewhile Logic ERP has parties waiting to be re-sent to you, the call returns at most the one party you asked for, but all the waiting parties are marked as sent and will not come again. To look up one party, always send"GlobalModifyCode": 0withPartyUserCode.
Example request
Next batch after your stored bookmark:
One party by its code:
Test it
Send a request to the Logic ERP sandbox (a test company) from this page: open the block below, enter the sandbox user name and password (ask your Logic ERP support team), change the request if you like, and press Test it. The example asks for the first batch of the change log. Do not send "GlobalModifyCode": -1 here – it changes what the sandbox has marked as already sent.
Returns your customers and suppliers (parties) from Logic ERP: name, codes, addresses, contact details, GST details, account groups, agent and, if your setup allows it, the current ledger balance. Use it to keep the party list in your system in step with Logic ERP — normally by asking only for parties added or changed since your last call, or to look up a single party by its code.
The user name and password of your API site.
Your bookmark in the change log, as described in How Every API Call Works. 0 = from the start (or a period, with DateFrom/DateTo), a number = only changes after it, -1 = Logic ERP keeps the bookmark for you.
A period of changes, used when GlobalModifyCode is 0. Send both as null when you are not asking for a period: with GlobalModifyCode 0, leaving them out gives Invalid Date From... Write them as yyyy-MM-dd.
A period of changes, used when GlobalModifyCode is 0. Send both as null when you are not asking for a period: with GlobalModifyCode 0, leaving them out gives Invalid Date From... Write them as yyyy-MM-dd.
Logic ERP's internal party numbers (ActCode in the response), separated by commas, for example "34,90". Returns exactly these parties; the bookmark and period are ignored. Numbers and commas only.
One party code as shown in Logic ERP (User_Code in the response), for example "C1045". Returns that party whether or not it changed recently; the bookmark and period are ignored.
Always HTTP 200. Check Status, Message and GetData.
See the Status rules on this page and on How Every API Call Works.
Why the call failed, or a note. The reason may be followed by technical detail - read the first line.
The change-log bookmark (see How Every API Call Works).
Size of the answer, for example "2 KB".
No login was sent.
POST /api/GetPartyMaster HTTP/1.1
Host: demo.logicerp.com
Authorization: Basic username:password
Content-Type: application/json
Accept: */*
Content-Length: 67
{
"GlobalModifyCode": 0,
"DateFrom": null,
"DateTo": null,
"Doc_Codes": ""
}{
"GetData": [
{
"Act_Name": "text",
"Act_Type": "text",
"Grp_Name": "text",
"User_Code": "text",
"ActCode": 1,
"Stock_Transfer_Party": true,
"Stock_Transfer_BranchCode": 1,
"Stock_Transfer_BranchName": "text",
"IsCUOrSUAlso": true,
"AddlActUserCode": "text",
"Party_Add_1": "text",
"Party_Add_2": "text",
"Party_Add_3": "text",
"PinCode": "text",
"City_Name": "text",
"State_Name": "text",
"Country_Name": "text",
"Party_Sec_Add_1": "text",
"Party_Sec_Add_2": "text",
"Party_Sec_Add_3": "text",
"Sec_PinCode": "text",
"Sec_City_Name": "text",
"Sec_State_Name": "text",
"Sec_Country_Name": "text",
"Telephone_off": "text",
"Telephone_res": "text",
"Fax_no": "text",
"Mobile_no": "text",
"Email_address": "text",
"Contact_Name": "text",
"GST_No": "text",
"GST_State_Code": "text",
"GST_Registration_Type": "text",
"Is_Ecommerce_Party": true,
"Ecommerce_GST_No": "text",
"Group_Name1": "text",
"Group_Name2": "text",
"Group_Name3": "text",
"Group_Name4": "text",
"Group_Name5": "text",
"Group_Name6": "text",
"Group_Name7": "text",
"Group_Name8": "text",
"Deleted_": true,
"Create_Date": "text",
"Modify_Date": "text",
"Action_Code": "text",
"InActiveFor_SO": true,
"Agent_Name": "text",
"Agent_Short_Name": "text",
"Stop_Billing": true,
"BranchCode": 1,
"BranchName": "text",
"BranchShortName": "text",
"Food_Lisc_No": "text",
"LedgerBalance": 1,
"ListCustomFields": [
{
"FieldName": "text",
"FieldValue_1": "text",
"FieldValue_2": "text",
"FieldCode": 1
}
]
}
],
"Status": true,
"Message": "text",
"LastGlobalModifyCode": 1,
"resultSize": "text"
}Response fields
Each item in GetData:
Act_Name
text
Party name.
Act_Type
text
CU = customer, SU = supplier.
Grp_Name
text
The party's general account group, or (NIL).
User_Code
text
The party code shown in Logic ERP. Use it as PartyUserCode to fetch this party again.
ActCode
number
Logic ERP's internal party number. Use it in Doc_Codes.
Stock_Transfer_Party
true / false
true when the party is marked as a stock-transfer party in Logic ERP.
Stock_Transfer_BranchCode
number
The branch linked to this party for stock transfers; 0 when none. It can be filled even when Stock_Transfer_Party is false.
Stock_Transfer_BranchName
text
Name of that branch, or (NIL).
IsCUOrSUAlso
true / false
true when the party is also used as the other type (a customer that is also a supplier, or the reverse).
AddlActUserCode
text
An additional party code, if one is kept in Logic ERP.
Party_Add_1, Party_Add_2, Party_Add_3
text
First (main) address lines.
PinCode
text
PIN code of the first address.
City_Name, State_Name, Country_Name
text
City, state and country of the first address, or (NIL).
Party_Sec_Add_1, Party_Sec_Add_2, Party_Sec_Add_3
text
Second address lines (for example a delivery address).
Sec_PinCode
text
PIN code of the second address.
Sec_City_Name, Sec_State_Name, Sec_Country_Name
text
City, state and country of the second address, or (NIL).
Telephone_off, Telephone_res
text
Office and residence telephone numbers.
Fax_no
text
Fax number.
Mobile_no
text
Mobile number.
Email_address
text
E-mail address.
Contact_Name
text
Contact person.
GST_No
text
The party's GSTIN; empty or blank when unregistered.
GST_State_Code
text
GST state code of the party.
GST_Registration_Type
text
Registered, UnRegistered or Composite.
Is_Ecommerce_Party
true / false
true when the party is an e-commerce operator.
Ecommerce_GST_No
text
GSTIN of the e-commerce operator.
Group_Name1 … Group_Name8
text
The party's account groups at levels 1 to 8; empty when a level is not used.
Deleted_
true / false
true when the party is flagged as deleted.
Create_Date
date
When the party was created, dd/MM/yyyy; empty if not known.
Modify_Date
date
When the party was last changed, dd/MM/yyyy; empty if not known.
Action_Code
text
The latest change made to the party: N = added, M = modified, D = deleted. Empty when Logic ERP has no record of a change (possible with PartyUserCode or Doc_Codes).
InActiveFor_SO
true / false
true when the party may not be used on new sale orders.
Agent_Name
text
The party's agent or broker, or NIL.
Agent_Short_Name
text
Short name of that agent, or NIL.
Stop_Billing
true / false
true when billing to this party is blocked.
BranchCode
number
The branch the party is linked to; 0 when none.
BranchName
text
Name of that branch, or (NIL).
BranchShortName
text
Short name of that branch, or (NIL).
Food_Lisc_No
text
Food licence (FSSAI) number.
LedgerBalance
number
Current balance in ₹ — see the rules above. 0 when the ledger balance is not switched on.
ListCustomFields
list
Extra fields your company has defined for parties. See below.
When a party's address details are missing in Logic ERP, the address, contact, GST, city/state/country (both addresses) and Food_Lisc_No fields come back as null, and Is_Ecommerce_Party and InActiveFor_SO as false.
ListCustomFields — one entry for each visible extra field defined for parties, in the order set in Logic ERP, whether or not this party has a value:
FieldName
text
Name of the extra field.
FieldValue_1
text
The value for this party; null when none is entered.
FieldValue_2
text
A second value, used by some field types; null when the party has no value for this field, empty when only FieldValue_1 is filled.
FieldCode
number
Internal number – ignore.
Example response
Messages you may see
Party Master not found against Request... (with Status: true)
Nothing has been added to the change log after your bookmark.
You are up to date. Call again later with the same bookmark.
Party Not Found... (with Status: true)
No customer or supplier you can see was found: only other accounts changed in this batch, the parties are outside your account groups, nothing changed in the period you asked for, or the code you sent does not exist.
With a bookmark: store the new LastGlobalModifyCode and call again. With a period: there is nothing to fetch. With PartyUserCode or Doc_Codes: check the code.
A database error (with Status: false), for example Invalid column name 'abc'.
Doc_Codes contained something other than numbers and commas, or PartyUserCode contained a '. The reason may be followed by technical detail – read the first line.
Send Doc_Codes as numbers separated by commas, and a party code without quotes.
Last updated